Cable Winch Puller 3 Ton Electric Winch 220V For Cable Pulling
Application
3 ton Electric winch is used in power transmission and distribution
engineering, telephone construction
tower erection, traction cable, line, hoisting tools or heavy
objects, the electric winch is driven by a belt,
effectively prevent the damage of overload, there are pros and cons
and the speed of file, anti reverse
gear moment to ensure construction safety.
Winch can be modified as per requirement, such as changing curve
capstan into straight even
cylindrical shape and coming with steel rope.
Characteristic
1. Small Volume & Compact Structure.
2. Light Weight,Easy to Transport.
3. High Efficiency,Save Labor.
4. Widely Used,pulling,hoisting,lifting and so on.
5. Safe & Reliable,Interlock Brakes System.
Maintenance and safe use
In order to maintain the normal operation of the cutter mill, to
extend the service life of cutter cutter mill,
we must strengthen the cutter mill maintenance and repair. The
operator must understand the entire
machinery of the structure, performance, proficiency in use.
1, the permissible load on the roll is 3T: when slow turn 3000 kg,
1800 kg when fast forward; when 5T
slow turn 5000 kg, 2500 kg when fast forwarding may not overloaded.
2, 1/4 speed gear box lubrication oil must be maintained.
3, in order to prevent the phenomenon of jump block, in the
allocation block that has the effect of shifting
fork positioning of the ball as the spring. Therefore, when using,
pay attention to check whether the top
spring ball firmly. Before use, such as strong, you must replace
the spring.
4, automatic brake and brake interlock should always check the wear
condition of bakelite, the automatic
braking gear rotation and back loose clearance is 0.5 mm, greater
than 1 mm must be replaced bakelite,
otherwise easily lead to brake failure and accidents.
5 speed gear box in automatic brakes when lifting, automatic
braking gear issue, "Benedict, Benedict,
Benedict" sound, proven speed gear is working properly, it is not
this sound back to loose.
6, base of anchoring methods: by bearing support on both sides of
the drum (with two holes) of the
anchor point, not as an anchor point to other locations.
7, roll bearing locking screw, must cooperate with corresponding
holes, instead of prohibiting the use of
other screw locking screw.
8, the gear box housing is cast aluminum, screw it on too tight and
unnecessary disassembly, but can
not struck with a hammer.
9, after the machine by the long-distance transport, the need for a
detailed examination of each component fastening screws loose,
lubricating oil is normal.
10, the prime mover is gasoline, diesel, according to the machine
can use regulatory requirements.
11, before each use of the machine, you should check whether the
debris body, whether the impact of machine run around obstacles,
Also check each transmission, everything is normal, it can be used.
12, the machine after each use, the machine should promptly remove
dust, oil and other dirt.
Technical Data
| Model Type | Engine Power | Gear | Pulling Speed(m/min) | Pulling Force(Ton) |
| JJM3-D | Electric Engine | Slow | 4 | 3 |
| Quick | 7 | 1.8 |
| Reverse | 4 |
|
Please tell us the following information in your enquiry:
1. Engine Power ?
2. Pulling Speed(m/min) ?
3. Pulling capacity?
4. Quantity?
we'll give you a good price after confirming the above info.
Welcome to contact us by phone or e-mail, if you are interesting in
our products.
